Custom Stainless Steel Stamped Discs and Steel Mesh Blanks

Custom Filtration Inc. was approached by a client from the ATV industry to stamp 5,000 stainless steel mesh blanks. The blanks were to be used for oil pick-up during the manufacture of all-terrain vehicles.

Using our own custom built machinery and dies, we slit and stamped the 304 stainless steel blanks. In order to guarantee a high-level of quality control, we inspected and recorded the blanks for burrs and other problems. The finished blanks, which measured 1.8″ long and 1.230″ wide, were then delivered to the client’s Minneapolis, MN location.

For more information about this stamping project, please see the details below. To learn about our other services, please contact Custom Filtration Inc. today.

Stainless Steel Stamped Discs and Blanks Specifications:

Product Description

These stainless steel discs blanks are used in an oil pick-up application.

Capabilities Applied/Processes

Slit using custom built slitter

  • Slit into Coils


  • Blank using a custom built die
Overall Part Dimensions

40 x 40 mesh
.010″ Wire Diameter

Finished Blanks
Length: 1.800″
Width: 1.230″
Tightest Tolerances ±.005″

Tightest Tolerances


Material Used

Mesh: Type 304 Stainless Steel

Industry for Use

All-Terrain Vehicles


5,000 pcs

Delivery Location

Minneapolis MN

In Process Inspection

Inspect & Record 1st Piece for Burrs
Inspect & Record Every 500 Pieces

Standards Met

Customer supplied specifications

Product Name

Type 304 Stainless Steel Blanks